Australia Wide Delivery
Davey D15VA Sump Pump
Davey D15VA Sump Pump
$220.00 inc. GST
APPLICATIONS
• Grey water pumping
• Sump emptying
• Septic effluent disposal
• Water transfer
• Pumping of light slurries and factory waste
10 in stock
Description
Features and Benefits
Semi vortex, open impeller,
centrifugal design
• Able to pump soft solids in
suspension
• Less susceptible to blockage
D15VA models feature a special
recirculation port to keep soft
solids agitated in sump,
improving ability to pump away
such solids.
Double mechanical shaft seal in
oil bath with hard faced silicon
carbide/ceramic seal on pump
side (D15VA models have single
seals)
• Added motor protection
• Long service life
Sand slinger lip seal
• Added protection
• Long service life
Corrosive resistant 304 stainless
steel motor shell and strainer
• Long service life
• Attractive, lasting appearance
High quality paint finish
• Long service life
• Attractive lasting appearance
Automatic resetting thermal
overload
• Protected against overloading
HO7RNF oil resistant leads, 10
metres long with 3 pin power
plug
• Easy to connect to power
supply
• Longer life in dirty water
Operating limits
Capacities 240lpm
Heads to 7.5m
Max. submergence 12m
Max. operating
temperature 50oC
Max. soft solids
D15VA 20mm O.D.
D25VA 25mm O.D.
D40VA 35mm O.D.
Suitable Fluids
Clean or “grey water” of neutral pH
containing up to 10% small soft
solids or 1% fine solids. Some wear
should be expected while pumping
hard solids in suspension.
SUMP PUMPS
Also available in 220 volt 60Hz single phase.
Sand slinger lip seal
• Added protection
• Long service life
Corrosive resistant 304 stainless
steel motor shell and strainer
• Long service life
• Attractive, lasting appearance
High quality paint finish
• Long service life
• Attractive lasting appearance
Automatic resetting thermal
overload
• Protected against overloading
HO7RNF oil resistant leads, 10
metres long with 3 pin power
plug
• Easy to connect to power
supply
• Longer life in dirty water
Installation & Priming
Use a rope to position and retrieve the pump. Do not lower or retrieve the
pump using the power lead as this may damage the cable entry seals,
causing water leaks and unsafe operation.
Don’t use this product for recirculating or filtering swimming pools, spas, etc.
While these pumps are built to high safety standards, they are not approved
for installations where people will be in the water while they are operating.
Don’t pump abrasive materials. Sand and grit in the water being pumped
will accelerate wear, causing shortened pump life.
Keep your pump clean, particularly in situations where lint, hair or fibrous
materials may get bound around the pump shaft. Regular inspection and
cleaning will extend pump life.
Make room for the float switch to operate. Automatic models have a float
switch to turn them on when the water level rises and turn them off again
when it has been pumped down to the safe operating level of the pump. If
the float switch is not free to rise and fall, correct pump operation may not
be possible.
Don’t run your pump dry.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.